Skip to content
Exposed AggregateSpecialists Melbourne
  1. Home
  2. Areas
  3. Mount Waverley

Mount Waverley 3149 · City of Monash

Exposed aggregate in Mount Waverley

Call (03) 4052 5257 or get a free written quote.

Exposed aggregate in Mount Waverley, 3149

Mount Waverley is running a few years behind its neighbour on the same story: the 1960s cream brick and weatherboard stock is being rebuilt street by street, and the renovation half of the suburb is upgrading driveways and alfresco areas without touching the house. Both halves end up at exposed aggregate, the rebuilds because the builder’s facade asks for it, the renovators because it is the one upgrade that changes how the whole frontage reads for the cost of a surface.

Ground conditions

The suburb shares Monash’s reactive clay, softened by the gullies around Damper Creek and Valley Reserve where fill turns up on some blocks. Base preparation is decided at the site measure, not assumed.

Stone and paste for Mount Waverley homes

Mount Waverley’s streets are genuinely mixed, so the stone follows the house rather than the suburb. Against the surviving cream brick, warm Castlemaine buff over a natural grey paste picks up the mortar and keeps the period read. Against new render, the charcoal Dromana blends carry the day. The leafier streets near the reserves run shaded and damp in winter, which argues for a penetrating sealer that keeps the washed texture’s grip; the sealing guide covers that choice.

Permits and the crossover

Monash requires a vehicle crossing permit before the crossover is touched and inspects the boxing before the pour. It is lodged with the quote so it never holds up the job.

What exposed aggregate costs in Mount Waverley

A typical single driveway here is 40 to 50 m². Driveways run $130 to $185 per m², patios and alfresco $140 to $195, paths $130 to $180, resealing $18 to $30 with a minimum charge, and removal and replacement $165 to $220 all in. The cost guide publishes every range with worked examples, and the written quote after a site measure is fixed.

City of Monash crossovers in Mount Waverley

Covers Glen Waverley and Mount Waverley in our service area. Permits are typically turned around within a couple of weeks, and council inspects the boxing before the pour, so the permit is lodged as soon as the quote is accepted rather than the week the truck is booked.

Council crossover information

Nearby suburbs we also cover

Glen Waverley, Blackburn, Camberwell. See where we work.

What we pour in Mount Waverley

Prices are guides and move with site conditions; the cost guide covers what moves them, and the colours and stone guide covers the choice everyone spends longest on. The written quote after a site measure is fixed.

Questions

Exposed aggregate in Mount Waverley, answered

Do I need a permit for an exposed aggregate driveway in Mount Waverley?

Monash requires a vehicle crossing permit before the crossover is touched, with the crossover built to the council's standard and an inspection prior to pouring.

What does exposed aggregate cost in Mount Waverley?

Driveways run $130 to $185 per m² and patios $140 to $195, supplied and laid; the cost guide publishes every service including resealing and full replacement. Prices may vary with site conditions and variations; the written quote after a site measure is fixed.

Can new work match my existing exposed aggregate?

A close match is achievable when the stone source and paste colour are known, and a sample viewed against the existing surface is the reliable check. Weathered concrete has years of UV in it, so new work starts cleaner and settles towards the old over time.

Next step

Ready to price your exposed aggregate?

One fixed written quote, after a proper site measure and a look at the samples.

Call (03) 4052 5257 Get a Free Quote