Skip to content
Exposed AggregateSpecialists Melbourne
  1. Home
  2. Areas
  3. Brighton

Brighton 3186 · Bayside City Council

Exposed aggregate in Brighton

Call (03) 4052 5257 or get a free written quote.

Exposed aggregate in Brighton, 3186

Brighton frontages are finished to the same standard as their interiors, and the driveway is treated as landscaping, not infrastructure. The stock runs from protected Victorian and Edwardian streets to full contemporary rebuilds behind high walls, and both specify decorative concrete: the rebuilds because the architect drew it, the period homes because a gravel-look exposed surface suits a heritage frontage far better than brushed grey. This is the suburb where the stone selection conversation runs longest, and should.

Ground conditions

Sandy bayside ground that drains fast and sits soft, so compaction under the slab carries the structural load the clay suburbs give to thickness. Salt air is real this close to the bay, and it is a sealing consideration more than a concrete one.

Stone and paste for Brighton homes

The coastal palette belongs here honestly: Lilydale cream over off white paste for the lime-washed and rendered homes, fine 7mm warm blends for period paths and verandah surrounds, and Dromana grey over charcoal for the walled contemporary builds. Wet viewing matters doubly near the bay, because sea light flattens pale surfaces at midday. The colours and stone guide walks the combinations, and the sealing guide covers the salt-air reseal discipline.

Permits and the crossover

Bayside requires a vehicle crossing permit and enforces its standard design, with heritage precincts able to limit crossover changes and street trees protected. What applies to your street is confirmed in writing with the quote.

What exposed aggregate costs in Brighton

Driveways run $130 to $185 per m², patios and alfresco areas $140 to $195, paths $130 to $180, resealing $18 to $30 with a minimum charge, and removal and replacement $165 to $220 including removal. Premium imported pebble blends, a frequent Brighton request, sit at the top of each range; the cost guide explains where the stone budget goes. The written quote after a site measure is fixed.

Bayside City Council crossovers in Brighton

Covers Brighton and Hampton in our service area. The sandy ground near the bay drains well but can sit soft, so the base is compacted thoroughly before any pour. Heritage overlays in parts of Brighton can limit crossover changes, and street trees are protected, both checked before the quote is finalised.

Council crossover information

Nearby suburbs we also cover

Hampton, Bentleigh. See where we work.

What we pour in Brighton

Prices are guides and move with site conditions; the cost guide covers what moves them, and the colours and stone guide covers the choice everyone spends longest on. The written quote after a site measure is fixed.

Questions

Exposed aggregate in Brighton, answered

Do I need a permit for an exposed aggregate driveway in Brighton?

Bayside requires a vehicle crossing permit and enforces its standard crossover design, with attention to heritage precincts and street tree protection.

What does exposed aggregate cost in Brighton?

Driveways run $130 to $185 per m² and patios $140 to $195, supplied and laid; the cost guide publishes every service including resealing and full replacement. Prices may vary with site conditions and variations; the written quote after a site measure is fixed.

Can new work match my existing exposed aggregate?

A close match is achievable when the stone source and paste colour are known, and a sample viewed against the existing surface is the reliable check. Weathered concrete has years of UV in it, so new work starts cleaner and settles towards the old over time.

Next step

Ready to price your exposed aggregate?

One fixed written quote, after a proper site measure and a look at the samples.

Call (03) 4052 5257 Get a Free Quote