Skip to content
Exposed AggregateSpecialists Melbourne
  1. Home
  2. Areas
  3. Bentleigh

Bentleigh 3204 · Glen Eira City Council

Exposed aggregate in Bentleigh

Call (03) 4052 5257 or get a free written quote.

Exposed aggregate in Bentleigh, 3204

Bentleigh works with narrow frontages and makes every metre count. The Californian bungalows are being renovated or replaced with townhouses and family builds, and the standard job is the same either way: a single crossover widened for two cars, a driveway running hard against the fence line, and a small front garden that has to look designed because all of it is visible from the street. On a frontage that tight, the driveway is a third of the view, which is exactly why exposed aggregate gets specified.

Ground conditions

The ground softens towards the bay side of the suburb, sandier than the eastern clay belt, draining well but needing thorough compaction under any slab. It is checked, not assumed, at the site measure.

Stone and paste for Bentleigh homes

Narrow blocks reward lighter surfaces: a pale Lilydale or mixed warm blend over an off white or natural grey paste visually widens a tight frontage where charcoal would close it in. Bungalow renovations lean warm to sit with red brick and period timber; townhouse builds go where their trim goes. The colours and stone guide covers both, with samples viewed wet and dry at the house.

Permits and the crossover

Glen Eira issues its vehicle crossing permit through the engineering team, allows one crossover per property as standard, and looks closely at widened crossovers because of the street parking they remove. The widening conversation is had with council before it is a line on your quote.

What exposed aggregate costs in Bentleigh

Driveways run $130 to $185 per m², patios and alfresco $140 to $195, paths $130 to $180, resealing $18 to $30 with a minimum charge, and removal and replacement $165 to $220 including the old surface out. Bentleigh’s compact jobs benefit most from pairing, drive, porch and bin path in one pour; the cost guide shows why. The written quote after a site measure is fixed.

Glen Eira City Council crossovers in Bentleigh

Covers Bentleigh in our service area. Frontages here are often narrow and many jobs are single crossovers being widened for two cars, which council assesses closely for width and the on-street parking it removes. One crossover per property is the standard position, so a second one is a conversation with council before it is a line on a quote.

Council crossover information

Nearby suburbs we also cover

Brighton, Hampton, Mentone. See where we work.

What we pour in Bentleigh

Prices are guides and move with site conditions; the cost guide covers what moves them, and the colours and stone guide covers the choice everyone spends longest on. The written quote after a site measure is fixed.

Questions

Exposed aggregate in Bentleigh, answered

Do I need a permit for an exposed aggregate driveway in Bentleigh?

Glen Eira requires a vehicle crossing permit through its engineering team, with the crossover built to council's standard and inspected. Only one crossover per property is allowed as standard.

What does exposed aggregate cost in Bentleigh?

Driveways run $130 to $185 per m² and patios $140 to $195, supplied and laid; the cost guide publishes every service including resealing and full replacement. Prices may vary with site conditions and variations; the written quote after a site measure is fixed.

Can new work match my existing exposed aggregate?

A close match is achievable when the stone source and paste colour are known, and a sample viewed against the existing surface is the reliable check. Weathered concrete has years of UV in it, so new work starts cleaner and settles towards the old over time.

Next step

Ready to price your exposed aggregate?

One fixed written quote, after a proper site measure and a look at the samples.

Call (03) 4052 5257 Get a Free Quote