Skip to content
Exposed AggregateSpecialists Melbourne
  1. Home
  2. Areas
  3. Balwyn North

Balwyn North 3104 · City of Boroondara

Exposed aggregate in Balwyn North

Call (03) 4052 5257 or get a free written quote.

Exposed aggregate in Balwyn North, 3104

Balwyn North rebuilds at prestige scale: the original clinker brick homes are being replaced with large rendered houses, French provincial and modern in roughly equal measure, on blocks bought as much for the school zone as the land. Frontages here are finished to be photographed, and the driveway is specified with the facade, not after it. Exposed aggregate is the default because it reads as stone, holds its colour, and takes the daily traffic of a two and three car household without showing it.

Ground conditions

The suburb sits on the eastern clay belt, stable by local standards but still seasonal. Original driveways poured thin on it are the ones being replaced now; the fix is in the base and the steel, per the specification.

Stone and paste for Balwyn North homes

Against white and cream render, the high contrast calls work: Lilydale cream over off white for the provincial builds, or Dromana grey over charcoal where the trim runs dark. The one caution in this suburb is glare, a large pale driveway in full sun is bright, so pale blends are always viewed dry at midday as well as wet. The colours and stone guide covers both directions, and samples settle it at the house.

Permits and the crossover

Boroondara requires a vehicle crossing permit before any crossover work and inspects before and after the pour. Street trees are protected, and wider crossovers can need planning sign off, all identified with the quote.

What exposed aggregate costs in Balwyn North

Driveways run $130 to $185 per m² supplied and laid, patios and alfresco $140 to $195, paths $130 to $180, resealing $18 to $30 with a minimum charge, and removal and replacement $165 to $220 including the old drive out. Rebuild frontages here often pour driveway, porch approach and side path together, which shares the mobilisation; the cost guide explains why that saves. The written quote after a site measure is fixed.

City of Boroondara crossovers in Balwyn North

Covers Balwyn North and Camberwell in our service area. Boroondara is strict on crossover width and on protecting street trees, and it inspects both the formwork before the pour and the finished crossover after it. Many Camberwell streets sit in a heritage overlay, so a second or wider crossover can need planning sign off on top of the standard permit.

Council crossover information

Nearby suburbs we also cover

Camberwell, Doncaster, Box Hill. See where we work.

What we pour in Balwyn North

Prices are guides and move with site conditions; the cost guide covers what moves them, and the colours and stone guide covers the choice everyone spends longest on. The written quote after a site measure is fixed.

Questions

Exposed aggregate in Balwyn North, answered

Do I need a permit for an exposed aggregate driveway in Balwyn North?

Boroondara needs a vehicle crossing permit before any crossover work, with the new crossover built to council's standard drawing and inspected before and after the pour. Heritage overlay streets can add conditions on width and material.

What does exposed aggregate cost in Balwyn North?

Driveways run $130 to $185 per m² and patios $140 to $195, supplied and laid; the cost guide publishes every service including resealing and full replacement. Prices may vary with site conditions and variations; the written quote after a site measure is fixed.

Can new work match my existing exposed aggregate?

A close match is achievable when the stone source and paste colour are known, and a sample viewed against the existing surface is the reliable check. Weathered concrete has years of UV in it, so new work starts cleaner and settles towards the old over time.

Next step

Ready to price your exposed aggregate?

One fixed written quote, after a proper site measure and a look at the samples.

Call (03) 4052 5257 Get a Free Quote