Skip to content
Exposed AggregateSpecialists Melbourne
  1. Home
  2. Areas
  3. Box Hill

Box Hill 3128 · City of Whitehorse

Exposed aggregate in Box Hill

Call (03) 4052 5257 or get a free written quote.

Exposed aggregate in Box Hill, 3128

Box Hill is two suburbs in one: high rise gathering around the station, and quiet brick and weatherboard streets a few blocks out where the knock-down rebuild wave from Balwyn and Blackburn meets townhouse development. The residential work is rebuild frontages and townhouse driveways, and exposed aggregate is specified on both, on the rebuilds for the facade, on the townhouses because a shared driveway in decorative stone lifts every unit’s street presence at once.

Ground conditions

The same eastern reactive clay, with the extra wrinkle that infill sites often carry demolition fill. What is actually under the surface is established at the site measure, and the base is corrected before anything is poured.

Stone and paste for Box Hill homes

Townhouse rows tend to run dark trim on light render, and a mid grey Dromana blend over natural grey paste serves the whole row without favouring one facade. Rebuilds follow the same logic as Balwyn North next door, charcoal for dark trim, buff for brick. Compact frontages here often pour the driveway, porch pad and bin path in one visit, one blend throughout, which reads cleaner and prices better.

Permits and the crossover

Whitehorse issues its vehicle crossing permit through the asset protection process, with the two permits usually lodged together, and requires an unused old crossover to be removed and the kerb reinstated. Identified with the quote, priced up front.

What exposed aggregate costs in Box Hill

Driveways run $130 to $185 per m², patios and alfresco $140 to $195, paths $130 to $180, resealing $18 to $30 with a minimum charge, and removal and replacement $165 to $220 including removal. Small paired pours are the Box Hill pattern and the cost guide explains why pairing saves; the written quote after a site measure is fixed.

City of Whitehorse crossovers in Box Hill

Covers Box Hill and Blackburn in our service area. The vehicle crossing permit and an asset protection permit usually go in together. Where a driveway is being relocated, council requires the old crossover to come out and the kerb and nature strip to be reinstated, which is priced into the quote rather than discovered later.

Council crossover information

Nearby suburbs we also cover

Blackburn, Balwyn North, Doncaster. See where we work.

What we pour in Box Hill

Prices are guides and move with site conditions; the cost guide covers what moves them, and the colours and stone guide covers the choice everyone spends longest on. The written quote after a site measure is fixed.

Questions

Exposed aggregate in Box Hill, answered

Do I need a permit for an exposed aggregate driveway in Box Hill?

Whitehorse issues a vehicle crossing permit through its asset protection process. Council specifies the crossover profile and requires the old crossover to be removed and the kerb reinstated if it is no longer used.

What does exposed aggregate cost in Box Hill?

Driveways run $130 to $185 per m² and patios $140 to $195, supplied and laid; the cost guide publishes every service including resealing and full replacement. Prices may vary with site conditions and variations; the written quote after a site measure is fixed.

Can new work match my existing exposed aggregate?

A close match is achievable when the stone source and paste colour are known, and a sample viewed against the existing surface is the reliable check. Weathered concrete has years of UV in it, so new work starts cleaner and settles towards the old over time.

Next step

Ready to price your exposed aggregate?

One fixed written quote, after a proper site measure and a look at the samples.

Call (03) 4052 5257 Get a Free Quote